Filament (FDM)
Filament 3D Printing
in Portland, OR
PLA and PETG. Replacement parts, brackets, custom mounts, drone gear, organizers, jigs. Small batch only — we print one at a time, properly.
Use Cases
What We Print in Filament
Replacement Parts
Drawer pulls, knobs, brackets, clips, hinges, gear teeth — anything that snapped on a piece of furniture or appliance. Send a photo with a ruler in frame and we can quote.
Custom Mounts & Brackets
Camera mounts, sensor brackets, networking-gear shelves, ham-radio antenna clips. Pairs nicely with our Smart Home division when the mount you need doesn't exist off-the-shelf.
Drone & RC Parts
Frame mounts, motor pods, antenna brackets, prop guards. PETG for outdoor durability, PLA for lightweight indoor parts.
Organizers & Jigs
Garage shop organizers, drill jigs, alignment tools, cable trays, Gridfinity bins. The kind of part that's faster to print than to source.
Cosplay Hardware
Belt clips, prop joints, helmet vents — the functional bits behind the finish. Sized for sanding, priming, and painting.
Small Production Batches
5 to 20 identical units when injection molding doesn't make sense. Quoted per job with a per-unit price that drops with volume.
Materials
PLA, PETG, and What's Coming
PLA
Default for most jobs. Stiff, accurate, easy to print, paint-friendly. Best for indoor parts, prototypes, organizers, miniatures. Not the right pick for parts that sit in a hot car.
PETG
Tougher and a bit flexible. Better for outdoor parts, mounts that take stress, and anything exposed to UV or higher temps. Slightly harder to sand and paint than PLA.
Specs
Build Size, Layer Height, Turnaround
Build Envelope
Up to ~220×220×250mm per part. Larger parts split into pieces and bonded — we'll flag this in the quote if it applies.
Layer Heights
0.2mm standard, 0.12mm fine, 0.3mm draft. We pick the right setting for cost vs. finish and put it in the quote.
Turnaround
Quick-print parts in 48–72hr. Multi-piece jobs and small batches in 1–2 weeks. Rush jobs possible — ask.
How a Job Goes
File to Finished Part
Send the File
STL, OBJ, or 3MF preferred. No file? Send a sketch or photo with a ruler — we can model simple parts in-house.
Quote + Material
Flat quote within one business day. We confirm material, layer height, infill, and finish before any spool gets loaded.
Print + Light Cleanup
Supports removed, brims trimmed, any stringing cleaned. Heavier post-processing (sanding, priming) quoted separately.
Pickup or Local Drop
Local pickup in Portland metro, or a short drop within the service area. Packed clean so it actually arrives clean.
Ready to print?
Send us the file or a description — we'll have a flat-rate quote in your inbox within one business day.